|
Onsite Seminar Details
In-House (Onsite)
seminars are the most cost effective way to train employees,
at all levels. At IPLAS, we can tailor our existing
seminars to fit your products, your materials, and your needs. Each
course includes a title book ($80 value).
At present we are offering,
at
your site,
the following 2-day seminars: (Click any title
for detailed outline)
1 -
"Fundamentals of Injection Molding - Linking the Process and the
Product"
This seminar provides a full, basic knowledge of plastics
injection molding technology. Covers the process, the machine, the
parameters, the variables, the mold, the material,. quality, and
common defects.
2 -
"Troubleshooting - A Guide For Injection Molders"
This seminar provides an in-depth understanding of the unique
Bryce troubleshooting concept. You will learn how to troubleshoot in
a simplified manner that will do away with those guide sheets you've
been using. We cover the 23 most common defects and their prevention
and solution.
3 -
"Fundamentals of Mold Design and Construction"
This seminar provides a fundamental knowledge of mold design
and construction. You will learn the basics of meaningful mold
design, how to determine cooling efficiency, draft angles, gate and
runner design, venting principles, and obtain a basic understanding
of how molds are built.
4 -
"Manufacturing Startup and Management"
If you're looking to start your own molding facility, or just
wish to expand an existing operation, this seminar is for you. It
provides a comprehensive framework building a new facility from the
ground up or expanding an existing shop. Subjects covered include
plant layout, determining equipment needs, estimating costs of plant
and product, how to staff, training needs, and initiating quality
control.
5 -
"Fundamentals of Product Design and Material Selection"
This seminar is designed to provide basic product design
guidelines and instruction for developing manufacturable plastic
molded products. This is a thorough of all the aspects of product
design concerns, such as snap fits, specific material limitations,
wall thickness guidelines, and a variety of other subjects. The
charts and diagrams alone are features that can't be found
elsewhere.
IPLAS has arranged to have training expert
Douglas M. Bryce instruct these seminars. See comments below
from previous attendees.
PLEASE NOTE:
there is an additional instructors travel expense fee of $1,500
for every seminar. This covers airfare, housing, and meals for the
instructor. The total 2-day attendee fee shown below includes all
handout materials. Lunch and break
accommodations are the responsibility of your company.
Our rates are shown in the following chart.
Please contact us directly if you have requirements for other
subjects.
|
Attendees |
Fee Per
Attendee |
| 6 (minimum) |
$550 |
| 8 |
$510 |
| 10 |
$475 |
| 12 |
$450 |
| 15 |
$430 |
| 30 (and up) |
$400 |
Please click
for a formal quote, or contact us by phone (512) 863-5933 or e-mail at
INFO.
Attendee Comments:
"Mr. Bryce has a very effective style of communication, making
everything easy to comprehend. He obviously understands the industry and its
complexities.".
"Doug was extremely knowledgeable on the subject and very good at
answering all questions presented."
"Overall, the seminar offered a terrific learning experience. It raised
a lot of questions to ask our suppliers and vendors, and generated further interest in
injection molding."
"Very much worth the money.
Way less expensive than attending regional
seminars, and I can start increasing profits right away with the things I
learned."
"I have 30 years experience and still learned a lot from Doug. Well
worth the fee."
|
