|
|
Troubleshooting - a Guide For Injection Molders
 |
Troubleshooting - A guide for Injection Molders is a
comprehensive, 6x9 inch hard-cover book intended for operators,
technicians, engineers, and others wishing to quickly identify and
solve common molding defects at the injection press.
Covers 23 of the most common defects and addresses the likely
causes and solutions. Includes splay, blush, voids, warp, short
shots, cracks, black marks, streaks, and a variety of other common
defects.
Includes a full color, 4 page centerfold showing typical examples
of all defects covered in the text.
This 200 page Guide was written by training expert and Certified
Troubleshooter Douglas M. Bryce and includes other detailed
information for troubleshooting such as proper venting practices,
the role of the operator, understanding materials, and recommended
melt and mold temperatures for trouble-free molding.
Also includes a glossary of common terms used in the plastic
injection molding industry.
DON'T WAIT - ORDER YOUR COPY TODAY and start solving your defect
problems tomorrow!
Hardcover Book =
$18.95
|
| |
|
|
Copyright 2009 IPLAS
|
